Gwangju Institute of Science and Technology Researchers Develop a Novel Thermoelectric Generator Inspired from Zebra Skin

The novel design is flexible, lightweight, and completely biodegradable, suggesting its potential for developing scalable, renewable energy systems

GWANGJU, South Korea, March 9, 2023 /PRNewswire/ — Thermoelectric generators (TEG) are devices that can convert temperature gradients to electricity. Such devices are extremely useful for generating electricity for remote sensors that cannot be connected to the main electricity grid. A conventional TEG is composed of one side(top or bottom) that radiates heat to cool down and the other side that absorbs heat from the sun or the environment. This, in turn, generates out-of-plane temperature gradient, which is converted into electricity. However, such requirements often make for designs that are bulky, complex, and inefficient. This, in turn, makes TEGs hard to integrate with other components or systems, limiting their applications in renewable energy systems.

Fortunately, researchers from Korea may now have found a way to surmount these challenges. In a new study, the researchers, led by Professor Young Min Song from Gwangju Institute of Science and Technology (GIST), reported a new flexible, lightweight, and biodegradable TEG that gets its inspiration from an unlikely place – zebra skin. Essentially, the design uses a pattern resembling black-and-white zebra stripes to create a high in-plane temperature gradient for generating electricity. The breakthrough was published in Volume 9 Issue 5 of the journal Science Advances on 01 February 2023.

Traditional TEG designs are large and bulky as they rely on natural convection, which leads to an out-of-plane temperature gradient. This requires hard insulators, which limit the application of TEGs in flexible and wearable devices. We have now transcended this paradigm in our design by creating an in-plane device that is flexible and biodegradable. This increases its applicability while reducing its environmental impact by making it scalable, integrable, and sustainable,” explains Prof. Song.

The researchers used poly(L-lactide-co-ε-caprolactone) (PLCL), a white, flexible, and biodegradable material, for manufacturing the TEG. PLCL reflects sunlight and emits infrared (IR) radiation, which allowed the area below it to be cool. On top of this material, the researchers applied black poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) or (PEDOT:PSS), which appears black to the eye, bringing out the stripes resembling that on the zebra skin against PLCL. The reason PEDOT:PSS appears black is because it absorbs the sunlight coming on it while reflecting the IR radiation coming from below it (emitted by the PLCL). This, in turn, increases the temperature of the area below the black stripes, creating alternating warm and cold regions, i.e., a temperature gradient, which can then convert into electricity.

The researchers achieved this conversion using an array of silicon nanomembranes in their design. The novel design was able to generate a maximum temperature difference of 22°C along with a maximum energy density of 6 µW/m². Moreover, the device was completely biodegraded without any remaining by-products with a mere span of 35 days.

With these remarkable properties, the new TEG design is sure to open doors to scalable, eco-friendly energy systems.


Title of original paper: Zebra-inspired stretchable, biodegradable radiation modulator for all-day sustainable energy harvesters
Journal: Science Advances

About the Gwangju Institute of Science and Technology (GIST)

Seulhye Kim
82 62 715 6253

SOURCE Gwangju Institute of Science and Technology